Method 1: Reinstall Driver for PC:
Step 1 : First of all, you plug the USB into the computer. Open Devices Manager to see if the computer has received a USB driver. On the desktop, right click on Computer and select Manage.

Step 2 : At the Computer Management interface, select Device Manager and you will see a list of all USB devices connected to your computer.

Step 3 : I get enough USB drivers but my computer does not recognize USB. At this interface, right-click USB Composite Device and USB Root Hub and select Uninstall.

Step 4 : You will receive a notification, press OK to delete the device driver.

Step 5 : After removing the USB Diver, we will update the driver for the computer. You can use the software automatically update Driver now. We only need to install the software and let it automatically update the drivers for the machine only.
Method 2 : Place Letter and Paths for USB:
Step 1 : We also perform the same steps from step 1 to step 4.

Then unplug the USB and plug it back in. The computer will automatically reinstall the driver. If you click on Disk Management, you will see that the USB Disk 1 drive is not labeled as the HDD of computer Disk 0.

Right-click on USB and select Change Drive Letter and Paths …

Step 2 : Click Add at the bottom.

Step 3 : You choose the letter for the USB drive can be G, H, I, K, … then select OK.

Step 4 : Next we go to the Registry by clicking Start and selecting Run to open the Run dialog box.

Step 5 : Enter regedit and press Enter.

Step 6 : In the Registry Editor interface, navigate to the directory using the following path:

HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Class

Here, we will delete two keys:

4D36E980-E325-11CE-BFC1-08002BE10318 and 4D36E967-E325-11CE-BFC1-08002BE10318

Finally restart the computer to save changes.

The above is a fix not receive USB on the computer. If you have tried one of the two methods above and the problem is not resolved, try changing to a different USB port or transferring the USB to another computer to check for USB error.

You can refer to many new articles here.